A customer from Ghana returned to Dragon Diamond with samples on the second day of his visit. Our team carried out an on-site acrylic engraving and cutting demonstration using the LZ-M46B compact CO₂ laser machine, giving him a chance to see the process and examine the samples in person.
Bringing acrylic samples to a live demonstration
Seeing a machine in a catalog is a starting point. Bringing samples to a demonstration makes the discussion more specific: the customer can watch the work, inspect the result and discuss what matters for the intended product.
During this visit, we demonstrated engraving and cutting on acrylic. The customer then reviewed the samples and discussed the machine details with our team. The visit focused on evaluating the process and the sample result before the next purchasing decision.
A look at the process and the acrylic samples
The video shows the laser head over the worktable, an engraved design on a clear-looking acrylic piece, and the customer handling a gold-colored mirrored acrylic sample. These images document the demonstration and sample review. For a closer look at the sequence, watch the original Dragon Diamond Facebook video.
The stills have been cropped from a social video and kept at a modest size. They show the overall appearance, but do not establish dimensional accuracy, edge roughness or whether further finishing is needed. Those points should be checked on the physical sample against the intended use.
The compact machine used: LZ-M46B
The LZ-M46B 4060 CO₂ laser engraver and cutter has a listed working area of 600 × 400 mm. It is a compact option to evaluate for small acrylic signs, decorative pieces and personalized non-metal components that fit within the work area.
Its product page lists a height-adjustable honeycomb worktable and a Ruida 6445 controller. The machine configuration and process settings should be selected for the material and required result. This visit report does not specify the acrylic thickness, laser power used, cutting speed or cycle time.
If your sheets or designs need a larger work area, compare our CO₂ laser machine sizes before choosing a model.
What to check during your own acrylic sample test
A useful sample test starts with the material and artwork you actually plan to use. When reviewing a result, check:
- Engraving appearance: Are the lettering and graphic details readable at the size you need?
- Cut separation: Do the intended parts and internal features separate as required?
- Edge finish: Is the appearance acceptable for the final product, and is any additional finishing needed?
- Material layers: For mirrored or coated acrylic, confirm the backing and coating as well as the acrylic itself before testing.
- Repeatability and time: Review more than one piece and measure the actual cycle time for a representative design.
The goal is to match the machine and process to a defined product requirement. One demonstration does not replace testing a different material, thickness or design.
Request an acrylic sample test
Send us your acrylic type and thickness, artwork, finished part dimensions, desired finish and production needs. For mirrored or coated sheets, include details of the backing and coating. Our team can review the material and recommend a machine configuration for testing.
Planning a visit to Guangzhou? Contact us in advance to discuss your samples and demonstration requirements. Sample shipping arrangements are agreed separately.